Prolific PL-2303 USB-to-Serial Driver
Description
This driver is for USB-to-serial adapters based on the Prolific PL-2303 chipset family.
Supported chipsets listed in the source: PL2303HX/X/EA/RA/SA/TA/TB
For Windows 8, support is limited to the following chipsets: PL2303HXD, PL2303EA, PL2303RA, PL2303SA, PL2303TA, and PL2303TB.
Hardware ID: VID_067B&PID_2303, VID_067B&PID_2304
Technical details
| Driver name | Prolific PL-2303 USB-to-Serial Driver |
|---|---|
| Version | 1.7.0 |
| File size | 4 MB |
| File name | uc |
| Platform | Windows XP, Windows 7 |
| License | Free (manufacturer driver) |
| Release date | 11 Aug 2012 |
| Last updated | 19 May 2015 |
| Downloads | 8,345 |
| Manufacturer | Prolific |
Installation steps
- Download the file. Extract the archive to a folder.
- Run as administrator. Tools that read hardware information need administrator rights.
- Start the scan. Use the “scan” or “analyse” button in the tool.
- Save the result. Copy the hardware ID or report and use it when searching for a driver.
Frequently asked questions
Does this driver work on Windows 11?
If Windows 11 is listed in the supported OS tags, yes. If automatic driver installation is disabled, install this package.
I get a "device not found" error during setup
Disconnect the cable at the start and plug it in when the wizard asks. Connect directly to the PC, avoid USB hubs, and try another port.
Should I download the 32-bit or 64-bit driver?
Check Settings → System → About → System type. A 32-bit driver will not install on a 64-bit system.