1,511 drivers · Free · No sign-up
TR / EN ✓

Cyber USB Webcam Driver

Windows XP Windows 7 Windows 8 Windows 10 v2.00.105 · 19 MB · 21,556 downloads

Description

This driver is listed for Cyber USB webcams with one of the following hardware IDs: USB VID_0553 PID_0200, USB VID_0553 PID_0201, or USB VID_0553 PID_0202. It supports Windows XP, Windows 7, Windows 8, and Windows 10. Match the hardware ID shown by your computer with the list before installing the driver.

Technical details

Driver nameCyber USB Webcam Driver
Version2.00.105
File size19 MB
File nameuc
PlatformWindows XP, Windows 7, Windows 8, Windows 10
LicenseFree (manufacturer driver)
Release date19 Apr 2008
Last updated19 May 2015
Downloads21,556
Manufacturer Z-Cyber

Installation steps

  1. Download the file. Extract the archive and start the installer as administrator.
  2. Complete the installation. Follow the wizard; the camera driver and companion software are installed.
  3. Plug in the camera. Connect the camera to a USB port; it will be detected automatically.
  4. Test the image. Open the camera app; grant permission via Settings → Privacy → Camera if needed.

Frequently asked questions

Does this driver work on Windows 11?
If Windows 11 is listed in the supported OS tags, yes. If automatic driver installation is disabled, install this package.
I get a "device not found" error during setup
Disconnect the cable at the start and plug it in when the wizard asks. Connect directly to the PC, avoid USB hubs, and try another port.
Should I download the 32-bit or 64-bit driver?
Check Settings → System → About → System type. A 32-bit driver will not install on a 64-bit system.